THE ONLY OIL MADE EXCLUSIVELY TO REPLACE AURORA MODEL MOTORING SPECIAL RACING OIL Race Proven!! HODRA  Approved HO Drag Racers Association   VHORS  Approved Vintage HO Racing Series   VASHOSCROF  Approved  Vintage Anachronistic Society of HO Slot Car Racing Old Farts   VASCRA  Approved Vintage Aurora Slot Car Racers Alliance     The Red Aurora Model Motoring Special Racing Oil lives on! OK, Lets go with Sherman and Mr. Peabody and hop in the Wayback Machine for a trip back to the early 60's. It's Christmas morning, and Santa has left you a shiny new Aurora Model Motoring ThunderJet 500 HO race set. Oh man, this is soooo neat. Dad helps you set it up, and you break out the cars to take your first laps, and wow, do they squeak! They need oil! Fortunately, Santa also left a little 1/3 ounce jar of  Red Aurora Model Motoring Special Racing Oil, No.14-25, with that plastic stick in the cap, like the Service Manual shows. He knew you would need it. You oil up your new T-Jets, and now they run just fine. And that smell of Pancake Motors and Red Oil. MMMMMMMM!   All right, back to the Wayback Machine, and now it's the late 90's. You found all your old HO slotcars in the attic, and remember how much fun it was. Set it all up again, and boy, oh boy, do those cars squeak again, and your bottle of red oil has only a little bit left. You want to get more, but it is no longer available. Late 1998, the supply of the original red oil dried up. Being the T-jet junkie that I was, I set out to re-create that classic red oil, and here it is. Thunder Oil Red Racing Oil. Has the look, the feel, the color, and most important, the smell of the original, but with the lubricating technology of today. Thick like the original, it stays where it is put. Won't thin out when hot, will not throw off or run all down inside the motor like lighter oils. The perfect replacement for the original Aurora Red Oil. Comes in a 1 ounce LDPE Plastic bottle, with a 1 inch long micro oiler needle. Once again, your T-Jets, will be happy, and MMMMMMMM, that smell! Lets not forget Atlas, or Eldon, or Bauer, or Faller, or Marx, or Lionel, or Matchbox, etc., and of course, AFX, G+, JL, and AW cars too! Over 2000 bottles have sold since Thunder Oil was introduced in August of 1999. Your satisfaction is guaranteed! Have  been told by other slot addicts that Thunder Oil also works well on Tomy, Rokar/Lifelike and Tyco/Mattel cars as a gear lube, along with the larger scale cars. The Train hobbyists say the same, a great oil for the locomotive drive gears. Plus I have heard many stories of it's use on things other than just slots, and trains.   Thunder Oil red racing oil (tm) is now available in: Drop Dispenser A 1 oz. drop dispenser bottle, perfect for filling your favorite oiler, or refilling an original red oil glass bottle.   $2.50 each. Needle oiler A 1 oz.  bottle with a 1 inch micro oiler needle for getting to those hard to reach spots on your favorite T-Jet.            $3.50 each. That's more oil than you'll use in years! About 4 to be exact. Shipping Charges: 1 bottle, $2.50 for first class postage. 2 bottles, $2.75 3 bottles, $3.00 4 bottles, $3.25  5 bottles, $3.50  6 bottles, $3.75 7 - ? bottles,  postage TBD * Priority shipping can also be requested for any quantity of bottles for $4.60 per order. ( International and Canadian shipping charges TBD by destination and weight)

CHECK OUT THESE THUNDERBOYZ PACKAGES:

(save yourself a buck or two!)

1.) The "Get a Grip" Thunder Package ($11.50):
              1 x Micro Oiler of Thunder Oil  and your choice of:
      12 pr. of Tom Nagler's"Thunderslicks,"(tm)  OR
            12 pr. of Rocket Science Blackhawk Ribbed Standards

2.) The "JB" Thunder Package ($13.50):
1 x micro oiler of Thunder Oil
      6pr. of JB's Thunder Brushes

3.) The "Paperboy" Thunder Package ($21.50):
1 x micro oiler of Thunder Oil
                          6pr. of Thunder Brushes  and your choice of:
12pr. of Thunderslicks  OR
                12 pr. of Rocket Science Blackhawk Ribbed Standards

Also Available:

4.) NOS Standard T-Jet Chassis   ????? each.  
We all knew this day would come, and it has. NOS chassis are no longer in stock says REH. There are still new chassis available, but they will be everyone else's rejects. This being said, I can no longer guarantee that fast chassis will be available. If you are a casual runner, or looking for chassis to put under bodies in your collection, perhaps I can help. Prices TBD.

5.) Standard body mounting screws, 10 for $1.00

6.) #2 x 1/4 flat head slotted brass screws. Never grind the head of a stock body mounting screw again for track clearance.   5 for $0.50

7.) T-JET Guide pins; extra long & extra strong.     $0.50 each.

8.) AFX O-ring front tires for non-mag and magna-traction chassis.   $0.25 a pair.

9.) E82 T-jet pick-up shoes by WIZZARD  New design for better electrical contact   $2.00 per pair.  

11.) T-jet pick-up shoe springs.   OUT OF STOCK    $1.00 per pair.

12.)  AFX long axles  $1.00 ea.

13.) AFX pick-up shoe springs  $1.00 per pair.

14.) AFX brush springs  $1.25 per pair.

15.) NEW!!   H.O. Reproductions   http://www.ho-repro.com/index.htm         Reproduction Plastic Chrome Parts for Vintage Aurora Slot Cars,  injection molded and vacuum chrome plated. Made from the same polystyrene plastic material that Aurora used to make their products in the 60's.

T-Jet Stock Hubs  An exact reproduction of the original wheel, with a small change. The rear flange on the hub is thinner, with a short hub to offset the wheel away from the chassis, eliminating the problem of the wheels in the front hitting the pick-up shoes.  Perfectly round, and true!    $2.00 for a set of 4

Hot Rod/Indy/Dune Buggy Hubs   Chrome 4 dimple. No more searching thru several original hot rod wheels to find a good set. Once again, an exact reproduction of the originals, Perfectly round and true!      $3.00 for a set of 4

Hot Rod Vibrator 3 Spinner "Knock Off" Hubs    Hard to find, until now!  An exact reproduction of the wheels found only on the Vibe Hot Rod Roadsters, and Coupes.  Perfectly round, and true!           $4.00 for a set of 4

Hot Rod Moons      An H.O. Reproductions Original! Same dimensions as the Spinner hubs, but without the spinners, for a smooth "moon" surface.  Get that authentic Hot Rod look, in a plastic hub. Sweeeeet !! Perfectly round, and true!          $3.00 for a set of 4

1/16  drill bit   $1.50 ea.

#51 drill bit     $.75 ea.

#52 drill bit    $.75 ea.

T-Jet & Vibrator Style Hot Rod Windshield Frame   This frame is just like the original, it has the 4 ejector pin marks in the 4 corners on one side. It also has the plastic gate in the same spot.         $5.00 ea.

T-Jet & Vibrator Style Hot Rod Rollbar   This roll bar is faithful to the original in every way EXCEPT that it is molded in black under the chrome. Very few originals came molded in black.   $5.00 ea.

T-Jet  Style Hot Rod Side Pipes  These pipes look noticeably better than originals.   $10.00 a pair.

Vibrator Style Hot Rod Side Pipes   4 pipe as found only on the Vibes.   $10.00 a pair.

#1377 Chaparral Roll Bar   This piece is exactly like the original, it’s even molded in the same black plastic and has the gate marks in the same spots.   $5.00 ea.

Tyco '32 Ford Highboy Roadster Roll Bar  Exactly like the original, which is always missing!  $5.00 ea.

16.) Thunderslicks   http://www.thunderslicks.com/   Silicone rubber tires designed to replace the old stock tires found on 60's era Aurora ThunderJet slotcars, made by Tom Nagler.
      1 pr. for  $1.00
      6 pr. for $5.00
      12 pr. for $10.00

17.) JB's Thunder Brushes   http://www.thunderbrushes.com/  One of  the best T-Jet replacement brushes available. They are a top notch copper/carbon compound, they are legal for all but true "box stock" racing. Most (if not all) T-Jet racers will not run their cars without them.                         6 pr. for $12.00                                 

****For an alternative, check out Wizzard #E81 brushes in the Wizzard section.****

18.) JB's Thunder Slims   The same high quality of Thunder Brushes, in a brush to fit the Aurora Slimline chassis. 100% performance boost, you will be amazed at how well a slimline will run when you replace the cheezy stock brushes with Thunder Slims.    OUT OF STOCK  6 pr. for $12.00

20.) Rocket Science Blackhawks   weirdjack.com   Weird Jack Stinson's mighty fine silicone replacement tires to fit many of your favorite t-jets, and others!

#RSS   T-Jet Ribbed Standards   Looks stock, but wider and lower. A .385"od (mounted) tire versus the stock Aurora rubber at .405"od. For standard T-Jet and many other vintage HO car wheels.
$1.00 a pair, 6 pr. for $5.00, 12 pr. for $10.00 

#RST   T-Jet Ribbed Standard Thins   Same as Standards, but thinner for use inside those fenders on MEV Originals cars. These are also great for use in racing on *Hobby-Pro* and *Wizzard* independent front wheels. A .385"od (mounted) tire that is .075" thick. For standard T-Jet and many other vintage HO car wheels.    $1.00 a pair,  6 pr. for $5.00, 12 pr. for $10.00

#RSL   T-Jet Ribbed Lo-Profile   A  .350" diameter (mounted) Ribbed tire for stock wheels, vs .385 for standard.
$1.00 a pair, 6 pr. for $5.00, 12 pr. for $10.00  

#RSLT   T-Jet Ribbed Lo-Profile Thin   A .350" od (mounted) tire that is only .075 thick. For standard T-Jet and many other vintage HO car wheels. Primarily designed for use in racing on *Hobby-Pro* and *Wizzard* independent front wheels.  $1.00 a pair, 6 pr. for $5.00, 12 pr. for $10.00  

#BR   BAUER silicone tires (AFX front also)   A wide, lo-profile tire designed for those cool Bauer (Vincent) wheels. Low to get the overall dimension in the same range as the Ribbed Standard tire. These also work very well on the front wheels of AFX and JL X-Traction cars.   $1.00 a pair. 

#RSW   Ribbed Standard White Sidewall  The same quality Ribbed Standard tire, but with a classic wide white sidewall.    $3.00 per set of 4

#HRLB   Hot Rod Lo-Pros (blackwalls)  A low profile 450"od (mounted) tire for Hot Rod, Indycar and Truck type wheels. Low for mounting with front axle in "long" position.    $1.00 per pair.

#HRWB   Aurora Hot Rod Washer Slick   Clone of the stock Aurora "washer"  hot rod slicks. $1.00 a pair.

#TSLB   Tyco S Large Blackwall   A silicone clone of the original Tyco S tire, fits the Aurora hot rod and truck wheels.  $1.00 a pair.

#HRWWB   Hot Rod WIDE Washer Blackwall   A wider, radiused edge version of the hot rod "washer" slick, same price. $1.00 a pair.

#TO   Tuff-Ones  Clone of the original vintage Tuff-Ones silicone tires. The mounted OD is between .385 and .430" depending on the wheels used. This tire is made especially for the wider rear Tuff-Ones and Johnny Lightning T-Jet wheels.  $1.00 a pair.

#AFXS   A/FX Standards  General purpose .475 od (mounted) tire for AFX non-mag and magnatraction rear wheels.   $1.00 a pair.

#DRIVT   T-Jet one piece resin driver   Resin reproduction an early Aurora T-Jet driver figure. Cast in tan resin as one piece. Perfect for rebuilding an original car, or adding to an existing interior. $1.00 ea.

21.)  Tom Hiester's Tires  http://www.xp77.com/hiester   High quality silicone tires!

#S201  Hot Rod washer slicks $1.00 a pair.

#S101  Tuff Ones $1.00 a pair.       

#S501  AFX rear tires $1.00 a pair.      

#S001  T-jet Standards $0.75 a pair.

#S804  Lo Pro rears for .225 od hubs $1.00 a pair.

22.) Wizzard High Performance, Inc.  http://www.wizzardho.com    "Dedicated To The Highest Performance In Slot Cars"

#FR52   Front hub retainers for independent fronts. Those little white plastic things you always lose.        **Fit FR54   .059 axle**     $1.20 a pair.

#FR52B   Front hub retainers for independent fronts. Those little white plastic things you always lose.     **Fit FR54B  .063 axle**     $1.20 a pair.

#FR54  T-jet independent front set quickly becoming the favorite among racers, complete with .059 axle, hubs, retainers, and .360 tires.  $6.00 a set. 

#FR55  Set of 1/8" ID and 3/16" ID spacers for adjusting the weight on FR54 front ends.  $1.49 a set.

#FR56  Heavy Spacers for T-Jet independent front end (FR54)  $2.00 a set.

#FT2    Independent front tires cut to size.  $1.00 pr.   (specify .310, .315, .320, .325, .330, .335, .350, .355 not all sizes in stock)

#E81   T-Jet Brushes High quality Copper/Carbon Composite. Some say they are better than Thunderbrushes.   1 pair $1.50,  6 pair $8.00

#E82   T-Jet pick-up shoes by WIZZARD    $2.00 per pair.  

#AA5A  Phenolic .010 spacers. The perfect spacer between hub and chassis for stock hubs, or the independent fronts. Also a crown gear spacer.                   $1.00 for 10 pcs.

#AA1  Steel .005 Spacer.   Never stretch a t-jet pick up spring again! These spacers fit in the recess where the pick up springs rest on the chassis, you can now adjust your spring tension by .005 increments.  $1.00 for 8 pcs.

#LTJ   Wizzard  sponge silicone rear tires, on delrin hubs. Specify size choice: LTJ-350-G, LTJ-360-B, LTJ-380-B.
$9.00 per pair.  Limited supply, these tires have been discontinued, when they are gone, that's all folks!

#RGT09   Brass 9 tooth T-Jet pinion gear.    $1.00 each, or 5 for $4.00

#RGT12   Brass 12 tooth pinion gear as came in the "hop up kits."   $1.00 each, or 5 for $4.00

#RGT14   Brass 14 tooth armature/pinion gear. 14 tooth pinion as came with "tuff ones" chassis, and is the standard t-jet armature gear.                             $1.00 each, or 5 for $4.00

#RCG   NOS or American Line 15 tooth T-jet plastic crown gears*   ALL OUT OF STOCK  $1.00 each.
*specify for: 9 tooth pinion(standard crown gear), 12 tooth hop-up pinion(AFX crown gear + .010 spacer), 14 tooth pinion(AFX crown gear)

#RGT24D Brass 24 tooth T-Jet driven gear.  $1.50 each, or 4 for $5.00

#RGT24I  Brass 24 tooth T-Jet idler gear.   $1.50 each, or 4 for $5.00

#RA16W  .225 OD white double flanged rims for Wizzard PVT04 or Hiester S101 TUFF ONE slip on silicone tires.   $2.50 pr.

#PVT01  Wizzards Silicone AFX rear tires.   $1.00 a pr.

#PVT04  Wizzards Silicone TUFF-ONES rear tires.   $1.00 a pr.

#PVT05 Wizzards Silicone Hot Rod Washer Slick.   $1.00 a pr.

#PVT10  Wizzards Lo Pro Silicone tire to fit .225od  hubs.    $1.00 a pr.

#GS002  Pick-up Shoe Cleaner/Polisher – round disc type. Hand use or dremel with a #402 mandrel.   $1.50 each.

23.) A-WEST Products

Needle Point bottle set.  1 oz. Bottle with Cap (same as the oil bottle) and 3 stainless steel 1 inch long needles:                  .016od/.008id,   .025od/.013id,    .050od/.033id.

Use for glues, solvents, flux, fuel primer, cleaners,  or anything you may need a needle point dispenser for.   $6.75

Empty Thunder Oil  bottle,  comes with cap, and a #35  .035od/.023id  1 inch long needle.  $2.80

Bottle only,  $0.60      cap only, $0.20      1 " needle only, $2.00  

Other size needles are available, in both 1" and  4" lengths, on a per order basis.  E-mail for details. 

For quick delivery...
Thunderboyz Accepts Credit Card or Checking Account payments through PAYPAL.COM.
FAST, SECURE and FREE!!  At paypal, use my e mail address shown below.

To order Thunder Oil or Thunderboyz Products, please read the following instructions:
E-mail your selections, and I will confirm availability ASAP.
All orders will be shipped via the most economical means available,
depending on weight of the package. Price will be quoted with your order inquiry.

International orders are welcome (Shipping TBD by destination)

Payments may be made by cash, check, money order, or thru paypal

Please make checks or MO's payable to Steve Street.

Got a question? Looking for something that is not listed on the page?
I will do my best to find it for you, at the best price available.
Feel free to call or write any time.


Thunderboyz 
C/O Steve Street
210 Westmar Drive
Rochester, NY. 14624
USA

Phone:(Verizon cell) 585-750-9722
Send your Email inquiries to: sstreet1@rochester.rr.com

Dealer inquiries welcome!

4 x 16 THUNDERTRACK FOR SALE

$1100.00

E-Mail for details.